银河galaxy娱乐(中国)有限公司

plastic flooring manufacturers - Da julong flooring

全国统一服务热线

15821396693
Construction and maintenance of anti-static floor

时间:2021-07-24 01:16:48 访问量:1123


Construction of anti-static floor

Basic requirements:

  Ground requirements: flat and dry (the surface of cement ground shall be white) without obvious unevenness, and its surface unevenness shall be less than 2 / 1000mm, which is the ground leveled with 1:3 cement mortar for terrazzo ground and wood ground.


Construction tools are as follows:

       a. Scraper for coating conductive adhesive;
   b. rubber throwing head is used to hammer the plastic floor to fully bond it with the ground;
   c. blade for cutting plastic floor
   d. welding gun, used for welding floor.


Construction process:

    1. Clean the ground, find the center line, clean up the slag and ash on the ground, find out the center position of the room, and draw a vertical bisection center cross line.
  2. Laying copper foil (or aluminum foil) network
   A. paste copper foil strips on the ground according to the specified size to form a network. The intersection of copper foil shall be bonded with conductive adhesive to ensure the continuity between copper foils
     B. at least four points per 100 square meters in the pasted copper foil network are connected to the grounding wire
    3. Laying floor:
   A. apply conductive adhesive on part of the ground with a scraper;
   B. when the conductive adhesive feels sticky but not sticky, start laying the floor one by one from the center, and tap it with a rubber hammer while sticking. Keep a distance of 1.5-2.0mm between floors; Continue to apply conductive adhesive slowly and apply it all over the floor until a complete construction floor is paved.
   C. in the process of laying the floor, the copper foil must pass under the floor.
   D. soften the welding system at high temperature with a welding gun and fill the spacing between the floor and the floor.
   E. cut the protruding part of the welding rod with an art knife to ensure that the ground is clean.


企业地址:

总部地址:上海新金山工业园区金腾路1106号

华北分部:北京市通州区尚品台湖 石家庄中冶国际广场

卡曼工厂:上海新金山工业园区金腾路1106号

华南分部:浙江省嘉兴县嘉善姚庄镇

展厅暨仓储中心:

联系电话:

全国统一服务热线:021-60500084

招商热线:张小姐  13795233793

郭先生  15821396693

大巨龙北京营销中心:张小姐13911243276

大巨龙河北营销中心:郭先生13699142298

大巨龙内蒙营销中心:张先生18513242555

大巨龙山西营销中心:董先生18003317790

大巨龙天津营销中心:袁长友 13021363922

大巨龙安徽营销中心:邹先海 15221369906

大巨龙新疆营销中心:胡先生 18703219993

大巨龙华东营销中心:张女士 13795233793

大巨龙海南营销中心:王先生 18612411131

大巨龙福建营销中心:胡新军 13313853038

tel:15821396693 Address: Jin Teng Road, Jinshan District, Shanghai E-mail:dajulongfloor@126.com网站地图

银河galaxy娱乐|银河galaxy娱乐

XML 地图 | Sitemap 地图